How to Change Breaks

How To Change Break Fluid

It is very important to know how to change break fluid. Many mechanics recommend changing the brake fluid in your car every two years to ensure that your braking system continues to work efficiently and avoid damage components. It is not difficult to change from brake fluid, but you will need several new containers of brake fluid, a short length of clear tubing, a key that fits the bleeder valve brake the stirrup, and either a deputy or a bleeder kit man. Make sure to use either DOT 3 or DOT 4 brake fluid, as DOT 5 and 5.1 are intended solely for racing cars and can not be mixed with a kind used in ordinary vehicles.

Before learning how to change break fluid, mechanics do suggest cleaning the outside of the master cylinder to prevent dust from entering and contaminating the system. Then you need open tanks and to remove the old brake fluid with a siphon. An old pear juice will also suffice.

Once the old brake fluid is removed, fill each container of brake fluid to new fluid from a container that you just opened. Then you must choose a wheel at the start. With wrench, loosen the bleeder valve on the brake so it will be easy to turn when the time comes. If it is stuck closed, the spray valve with penetrating oil or heating with a lighter in May Help loosen it. Just be careful not to break the valve, as you will then have no way to bleed brakes without either drilling out and replacing the broken valve, or replace all Caliper!

At this point, you will need to have your assistant sit in the car so they can walk on the brakes for you. With the clear tube on the bleed nipple and a drip tray underneath, open the valve, then ask your assistant to walk on the brakes. Old, dirty brake fluid will flow into the tube and the drip tray. Once the pedal is down, your assistant will Tell yourself so you can close the valve. Only then, they take their foot off the brakes, remove it too soon will draw air back into the system.

Repeat these steps until nothing but clean, fluid can flow when the brake pedal is pressed. Ask your assistant to keep an eye on the reservoir of brake fluid, and refill as required. When the end of each wheel to the next and repeat the entire process until all four wheels have been bled. Then, simply close the reservoir of brake fluid, check valve drain to ensure they are closed, and you're all done It is important to change brake fluid every two years to maintain a clean environment, work the brake system. Brake fluid is designed to absorb moisture in the brake system.

This keeps your brake system in good condition, but it also reduces the life of the brake fluid. When the liquid has absorbed too much moisture, it begins to boil at a lower temperature, and when that happens your brakes stop working. In addition, the humidity tends to have dirt in it, who knows of the brake components and may possibly damage them

.

Copyright 2009. All Rights Reserved.
Design by Minimalistic Design